The set contains: 2 ea. XTX50 DIN regulators with 5 port swivel turrets. One XTX50 has a 83” / 210cm hose. One XTX50 has a 24” / 60cm hose. 2 ea. custom length MP inflation hoses (one for buoyancy system, one for drysuit). 2 ea. brass pressure gauges with 6 inch hoses (units in PSI). 1 ea. 90° elbow fitting, 1 ea. bungee necklace, 1 ea. stainless steel clip, 2 sets of short exhaust ports. Regulator bag to hold all. Setup illustration, CD manual and quick start guide. The Apeks Sidemount Regulator Kit is the first CE approved sidemount kit specifically for this type of diving.

First Stage: Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth. An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.

Second Stage: Pneumatically-balanced second stage results in smooth, easy breathing. The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used. Press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the center for the full effect of the purge, i.e. when regulator clearing etc. The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation. Easy-to-grip opening effort control knob keeps the diver in control The 2nd stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mold, yeast and algae. A silicone exhaust valve improves the breathing performance of the regulator. The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue. A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.

Free Parts for Life Program (Regulator Service Agreement)

The Free Parts for Life Program allows the customer to receive free parts when the regulator is due for overhaul. Free parts consist of the normal replacement items as found in the Regulator 1st & 2nd Stage Service Kits. Labor charges are not covered. Assuming the program guidelines are followed, the Free Parts for Life Program will apply to the life of the regulator and will significantly reduce the cost of ownership. This program is in addition to the standard product warranties outlined in the owner’s manual. The Free Parts for Life Program is a commitment by you (the Regulator owner), your Aqua Lung Dealer and Aqua Lung. To participate, you must be the original owner and have purchased the regulator from an Authorized Aqua Lung or Apeks America Dealer. The regulator must be brought to an Authorized Dealer at least once a year for inspection or overhaul according to the below schedule:

Year #1: Inspection

Year #2: Overhaul

Year #3: Inspection

Year #4: Overhaul

Etc.

To keep the Free Parts for Life Program active, both inspections and overhauls need to be documented in the Annual Service & Inspection Records included in the Owner’s Manual CD or the Records can be found online. If an inspection or overhaul is missed, the regulator no longer qualifies for the Free Parts for Life program. Visit Water World SCUBA, your local Aqua Lung Dealer, for more information.