Apeks XTX40/DS4 DIN Oxygen Regulator

Apeks XTX40/DS4 DIN Oxygen Regulator

$625.00

Availability: Out of Stock!

Part Number:RG114113 Manufacturer: Apeks Size: DS4/DIN OXYGEN

XTX technology is also available in an oxygen model. This regulator is built for oxygen percentages between 0 – 100%. This compatibility coupled with its excellent reliability make it the choice for technical divers doing high O2 percentage deco stops. This product qualifies for Free Parts for Life.

WARNING: Do not attempt to use this product with enriched air until you have obtained training in nitrox use with mixtures containing over 40% O2 by volume, from a nationally recognized training agency.

Green and yellow cosmetic pieces clearly identify that this regulator is dedicated for high-percentage oxygen use. The compact DS4 first stage has four medium-pressure ports and one high-pressure port (it does not feature the rotating turret found on the DST first stage). Features an innovative Diver Changeable Exhaust system (DCE). This system gives the diver the ability to change from a small exhaust tee to a large exhaust tee. This gives the user a choice, wider exhaust tee for minimal bubble interference (essential for underwater photography) and narrow exhaust tee for a smaller compact comfortable regulator. Only the narrow exhaust tee is supplied with the regulator. Can be converted from a right-handed hose configuration to a left-handed one. The process of changing the regulator to a left-handed configuration is both quick and simple. However, this procedure must ONLY be performed by an APEKS Authorised Service Technician. Available in DIN configuration only. A braided flexi-hose comes standard. These hoses are lighter weight, more flexible and more durable. Suitable for coldwater use (below 10 C / 50 F). This regulator is suitable for use with up to 100% oxygen.

First Stage: DS4 first stage. Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth. 1 HP port and 4 MP ports are angled for optimum hose routing. An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.

Second Stage: Pneumatically-balanced second stage results in smooth, easy breathing. The XTX purge buttons are large and easy to operate. A 2-stage progressive purge is used - press the purge on the side for a lower flow rate, useful where more control is required such as filling lift bags etc, then press in the center for the full effect of the purge, i.e. when regulator clearing etc. The large venturi lever has a soft touch rubber grip, which makes it easier to locate and use. The lever reduces the amount of grit ingress and therefore resists any possible friction giving a smooth operation. Easy-to-grip opening effort control knob keeps the diver in control. The second stage is manufactured with active protection against infection as all molded parts are produced with an additive that kills MRSA, protects against E-Coli, bacteria and fungi, and is also very effective against viruses, mold, yeast and algae. A silicone exhaust valve improves the breathing performance of the regulator. The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue. A heat exchanger (patented) which surrounds the valve mechanism, dissipates the cold caused by gas expansion while drawing in the warmth of the ambient water.

Free Parts for Life Program (Regulator Service Agreement)

The Free Parts for Life Program allows the customer to receive free parts when the regulator is due for overhaul. Free parts consist of the normal replacement items as found in the Regulator 1st & 2nd Stage Service Kits. Labor charges are not covered. Assuming the program guidelines are followed, the Free Parts for Life Program will apply to the life of the regulator and will significantly reduce the cost of ownership. This program is in addition to the standard product warranties outlined in the owner’s manual. The Free Parts for Life Program is a commitment by you (the Regulator owner), your Aqua Lung Dealer and Aqua Lung. To participate, you must be the original owner and have purchased the regulator from an Authorized Aqua Lung or Apeks America Dealer. The regulator must be brought to an Authorized Dealer at least once a year for inspection or overhaul according to the below schedule:

Year #1: Inspection

Year #2: Overhaul

Year #3: Inspection

Year #4: Overhaul

Etc.

To keep the Free Parts for Life Program active, both inspections and overhauls need to be documented in the Annual Service & Inspection Record included in the Owner’s Manual CD or the Record can be found online. If an inspection or overhaul is missed, the regulator no longer qualifies for the Free Parts for Life program. Visit Water World SCUBA, your local Aqua Lung Dealer, for more information.

 

0 reviews for Apeks XTX40/DS4 DIN Oxygen Regulator

Write a review

Can't read? Reload
top